TriStar Ltd introduces a line of liquid fillers for small bottles. These pneumatically actuated, gravity fed fillers are low-cost and easy to operate. Intended for perfume bottles, sample bottles, and other small containers, the G-Series is available in 6 different nozzle counts.
(DECEMBER 2015) Our Field Service Department has greatly added to its on-site rebuilding capabilities. We can now tackle complete rebuilds of rotary vacuum drum filters, belt filters, and many other industrial filters on-site. Fully insured, licensed, and skilled staff can completely re-tube a drum filter, rebuild agitators, replace bearings, replace drainage grids, install new belts, and replace knife advance systems - All at your location.
(MARCH 2015) - TriStar Ltd, has opened an eBay store to sell its products. Hot Water Sets, and washdown equipment are featured. Also available, are new, surplus valves at great prices. Visit the store here.
(FEBRUARY 2015) - TriStar Ltd. has signed an agreement with Streamline Washdown Equipment and is proud to offer Streamline's complete product line. Streamline makes Hot and Cold Water Mixing Valves, Steam Mixing Valves, Hoses, Nozzles, and Combinations. We also offer parts for all items.
Links to:
(NOVEMBER 2014) – TriStar, LTD., Buffalo, New York, announces the introduction of its new EDG-trac Knife Advance System for Pre-Coat Rotary Vacuum Drum Filters (RVDF). The Encoded Digital Guidance (EDG) system is designed to improve filtration performance and reduce energy costs. TriStar states that it will rebuild or remanufacture existing RVDF units at its facility or retrofit the EDG-trac system to an RVDF at a customer’s plant.
An independent field test at a leading chemical manufacturer in Buffalo, NY showed that the EDG-trac system increased filtration throughput by 700% on average and reduced energy consumption by 87% on a per-gallon filtered basis. The study was recently conducted by the New York State Pollution Prevention Institute (NYSP2I) at the Rochester Institute of Technology (RIT). In the study (consisting of two batch tests) the performance of an existing RVDF was measured. The entire filter was then replaced with a remanufactured RVDF and EDG-trac system from TriStar, and the new filter was evaluated under the same process conditions.
Ideal solids penetration into a pre-coat filter is 2 to 5 thousandths of an inch. The EDG-trac system removes as little as 1.4 thousandths of an inch per revolution at a drum speed as low as 0.2 RPM. This extends pre-coat life by not cutting away clean pre-coat while maintaining acceptable solids separation and improving liquid throughput, according to TriStar.
EDG-trac also features a highly efficient, single-motor VFD to reduce energy use and cost. A fully automated PLC controls the advance speed, retract speed, and drum speed, allowing precise control and providing valuable information to operators, the company states. An automatic high-speed retract mode reduces time between cycles and allows the filter to be recycled and put back online quickly.
TriStar says that the company can remanufacture an entire RVDF including EDG-trac at 60% to 70% the cost of a new filter in 8 to 10 weeks. It can also retrofit the EDG-trac system to any installed RVDF.
Established in 1985, TriStar LTD is a remanufacturer of filtration equipment including Rotary Vacuum Drum Filters, Belt Filters, Vacuum Belt Filters, and Filter Presses. In addition, TriStar manufactures a proprietary line of Hot Water Sets.
TriStar also fabricates a wide range of process equipment including pump skids, heat exchanger skids, pre-coat systems, frames, platforms, piping systems, and other custom projects. The company also provides welding services including piping, valve ends, equipment repair, sanitary piping, and stainless steel tubing.
For additional information, contact TriStar, LTD., 265 Mayville Avenue, Buffalo, NY 14217.
Phone: 716-873-0081
Email: sales@tristarltd.com
For additional information about the New York State Pollution Prevention Institute at the Rochester Institute of Technology, please
visit: http://www.NYSP2I.rit.edu
TriStar LTD welcomes Scheel and Company, Inc. of Medina, OH as our newest Manufacturer's Representative. Scheel and Company will cover all of Ohio and Western Pennsylvania. Scheel and Company, Inc. was founded in 1966 and offers a wide range of filtration and process equipment. Scheel and Company can be reached at: 330-725-4505 or Scheel@zoominternet.net. Their website is: www.scheelandcompany.com
TriStar LTD is a manufacturer and rebuilder of industrial filtration equipment including rotary vacuum drum filters, belt filters, and filter presses located in Buffalo, NY. Its products also include hot water sets for heat exchanger systems, valves, instrumentation, and custom fabrication.
Arizona Thermal Products, located in Phoenix, AZ is the newest Manufacturer's Representative for TriStar Ltd. Arizona Thermal Products will cover all of Arizona and New Mexico. They will also cover El Paso County in Texas. Arizona Thermal Products will apply their experience in heat transfer, process equipment, and filtration as they promote TriStar's filtration and hot water set product lines. Arizona Thermal Products can be reached at (602) 358-8266 or through their website: www.az-thermal.com
TriStar LTD is a manufacturer and rebuilder of industrial filtration equipment including rotary vacuum drum filters, belt filters, and filter presses located in Buffalo, NY. Its products also include hot water sets for heat exchanger systems, valves, instrumentation, and custom fabrication.
EMH Industrial Sales, located in Lakeland, Florida now represents TriStar Ltd. in the state of Florida. EMH has many years of process and filtration experience. They will be promoting TriStars filtration and hot water set product lines. EMH Industrial Sales can be reached at (863) 937-8606 or through their website: www.emhindustrial.com
TriStar LTD is a manufacturer and rebuilder of industrial filtration equipment including rotary vacuum drum filters, belt filters, and filter presses located in Buffalo, NY. Its products also include hot water sets for heat exchanger systems, valves, instrumentation, and custom fabrication.
Lycath Technical Sales Inc., located in Kitchener, Ontario now represents TriStar Ltd. in the province of Ontario, Canada. Lycath Technical Sales will apply their 21 years of industrial filtration and process experience as they promote TriStar's industrial filter remanufacturing services. Lycath Technical Sales, Inc. can be reached at (519) 894-2645 or through their website: www.lycathtech.com
TriStar LTD is a manufacturer and rebuilder of industrial filtration equipment including rotary vacuum drum filters, belt filters, and filter presses located in Buffalo, NY. Its products also include hot water sets for heat exchanger systems, valves, instrumentation, and custom fabrication.
Imler Equipment Inc. is the newest manufacturer's representative for TriStar Ltd. Imler Equipment, located in Exton, PA, will sell TriStar's industrial filter remanufacturing services in Eastern Pennsylvania, Southern New Jersey, Maryland, and Deleware. Imler brings 26 years of industrial filtration and process equipment experience to the growing TriStar Rep force. Imler Equipment can be reached at (610) 594-7996 or through their website: www.imlerequipment.com
TriStar LTD is a manufacturer and rebuilder of industrial filtration equipment including rotary vacuum drum filters, belt filters, and filter presses located in Buffalo, NY. Its products also include hot water sets for heat exchanger systems, valves, instrumentation, and custom fabrication.
TriStar LTD is pleased to announce that it has hired Charles M. Harrigan III as Sales and Marketing Director. As TriStar continues to grow it recognizes the need to expand its sales and marketing team. Harrigan brings many years of sales and marketing experience earned in the filtration industry. His expertise in industrial marketing will be put to use building TriStar's Internet presence and creating greater visibility to their markets. Harrigan will also be recruiting independent manufacturer's representatives to carry the TriStar line both in the US and internationally.
TriStar LTD is a manufacturer and rebuilder of industrial filtration equipment including rotary vacuum drum filters, belt filters, and filter presses located in Buffalo, NY. Its products also include hot water sets for heat exchanger systems, valves, instrumentation, and custom fabrication.
Copyright 2013 TriStar Limited